“The Burnisher” a Lustersheen product since 2/1/08. The Burnisher aka the Pine Brush,
There is no better tool for working with wax than this brush. If you are trying to achieve a high hard luster with Briwax, this is the tool to do it with. Not only is it a real time and labor saver, but it does bring the wax to a higher and harder luster than can usually be achieved by hand.
The brush bristles poke deep into recesses of carvings and moldings, and also deep into the pores of an open surface, which results in more of the wax being burnished and brought to a luster. Often, when buffing by hand on porous surfaces a cloth or lambs wool rides above and glides on the high points and these high points are burnished, but the lows are left untouched. That is why when burnished with “The Pine Brush” there is more luster because in actuality more surface area of the wax has been burnished.
Remember, if you are trying to achieve a high hard lustrous wax finish, the key is applying an optimally thin coat which is then burnished to a luster. So you will still need to apply the Briwax, usually with #0000 steel wool, to a super thin film, let the solvent evaporate off and then utilize this brush on a drill to buff it up. Let the drill provide the elbow grease.
The “Burnisher” brochure aka the Pine Brush: The Burnisher Brochure